Magellan MG-6130 Manual de instalación descargar pdf (Pagina 26)

just makes more sense that having the

zones randomly placed.

1.) Select Zone Profile by pressing “ok”

2.) Choose which Zone # you wish to add by

pressing “next” and “ok”.

3.) When the screen says “Press Tamper or

Press Learn Btn”. Press the “learn” button

on the individual sensor that you are

programming. For instructions on the where

the learn button is on the transmitter see

“Zone Hardware Descriptions” under “Learn

Mode” for that particular sensor.

4.) This is where you say the name of the

particular zone that you just learned into the

panel. (ex. Saloon door, Forward High

Water, etc.)

5.) Vocalize the zone label and press “stop”

6.) You can listen to the recording by

pressing “play”, re-record by pressing “no”,

or accept it by pressing “yes”

7.) Declare the type of zone that you want

by pressing next and then ok. For the most

common zone type definitions, see (Zone

Definitions).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Sin comentarios

Magellan MG-6130 Manual de instalación Pagina 26