Magellan Paradox Manual de instalación descargar pdf (Pagina 28)

28 Reference & Installation Manual

Table 9: Special Keys for Telephone Numbers

Central Station Telephone Numbers (CSTNs)

Section [111] = Central Station Telephone Number 1

Section [112] = Central Station Telephone Number 2

The Magellan console uses the CSTNs (C

entral Station

Telephone Numbers) programmed in sections [111] and/or

[112] to connect and communicate with the central

monitoring station. The following situations also apply:

• If after eight attempts of calling one central station

telephone number have failed, the console will then dial

the backup telephone number (if section [099] option [1]

is enabled. See CSTN 2 as Backup Number on page

28).

• If the Alternate Dial option (page 30) is enabled, the

console will dial the programmed backup telephone

number after every failed attempt (if section [099] option

[1] is enabled. See CSTN 2 as Backup Number on page

28).

• If no backup telephone number is programmed, the

console will never report to the backup telephone

number.

For more information on how these telephone numbers are

used, please refer to Event Call Direction on page 29 and

Reporting Formats on page 29. Also refer to Delay

Between Dialing Attempts on page 30.

CSTN 2 as Backup Number

Section [099]: Option [1]

Option [1] OFF = Use CSTN 2 as a central station

telephone number only

Option [1] ON = CSTN 2 can be used a backup

telephone number (default)

CSTN 2 can also be used as a backup telephone

number. If section [099] option [1] is enabled (ON) the

console will use CSTN 2 as a backup telephone number.

For more information, please refer to Central Station

Telephone Numbers (CSTNs) on page 28 and

Alternate Dial Option on page 30.

Pager Telephone Number

Section [113]

The Magellan console uses the Pager telephone number

programmed in section [113] to connect and communicate

the numeric pager message programmed in section [114]

(see Pager Reporting Message on page 28) to a pager.

Pager Reporting Message

Section [114]: 32-digit decimal number (0 to 9 as well as

[*] and [#])

Program the desired numeric message you wish to send

whenever the console dials the Pager telephone number

in section [114]. If the message is less than 32 digits,

press the left [

ACTION] key (ok) to save the message.

Voice Message Telephone Numbers

The Magellan console will use the Voice Message

telephone numbers (which are programmed in the Installer

menu. Refer to the Magellan Quick Setup Guide for more

information) to play a pre-recorded message to an external

telephone or cellular telephone. Please note the following

when programming and using this feature:

• The console will only dial a Voice Message telephone

number when the system is in alarm. The console

begins with the first programmed Voice Message

telephone number.

• When the call is connected, the console will play the pre-

recorded message and the zone labels of all the zones

that are in alarm.

• The person at the other end of the telephone must

acknowledge the call by pressing the [#] key on their

telephone.

• The console will repeat the message a programmed

amount of times (see Voice Message Repetitions on

page 28) if no acknowledgement is immediately

received.

• If no acknowledgement is received before the number of

repetitions has elapsed, the console will then call the

next programmed Voice Message telephone number

and repeat the process.

• After calling the last programmed Voice Message

telephone number without an acknowledgement, the

console will once again call the first Voice Message

telephone number and repeat the process a maximum of

three times.

• If no acknowledgement is received after the third time,

the console will generate a Fail to Comm. event and

trouble.

Voice Message Repetitions

Section [079]: 001 to 255 repetitions; Default = 3

repetitions

This feature determines the amount of times the console

will repeat the pre-recorded message played with the

Voice Message telephone number without receiving an

acknowledgement. Enter any 3-digit number from 001 to

255 into section [079] to program the Voice Message

Repetitions feature.

Service Telephone Number

Section [119]

When there is a trouble in the system that requires servicing

from your installer, the console will offer you the option of

calling the telephone number programmed in section [119].

After selecting the option, the console becomes a speaker-

phone.

Refer to the Magellan User Guide for more

information on using this feature.

Keys to press Action or Value

[*] *

[#] #

Center [

ACTION] (pause) key Add a 4-second pause to the

telephone number. Press the key and

a “P” will be inserted into the

telephone number

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Comentarios a estos manuales

Sin comentarios

Magellan Paradox Manual de instalación Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Magellan Paradox