Magellan Paradox Manual de instalación descargar pdf (Pagina 29)

Paradox Magellan Systems 29

Console Account Number

Section [107]

All report codes are preceded by a 4-digit or 3-digit Console

Account Number to ensure correct identification of the Magellan

console. The Console account number can be any hexa-digit

from 1 to F. To enter a 3-digit account number, simply press the

[0] key followed by the 3-digit account number. Also, when using

3-digit account numbers, you must use 1-digit report codes.

Reporting Formats

Section [105] = Reporting Format for CSTN 1

Section [106] = Reporting Format for CSTN 2

The reporting formats apply only to the CSTNs (Central Station

Telephone Numbers) programmed in sections [111] and [112]

(page 28)

The Magellan console can use a number of different reporting

formats and each Central Station Telephone Number can be

programmed with a different reporting format. The three digits

entered into section [105] represents the reporting format used

to communicate with Central Station Telephone Number 1 while

the three digits entered into section [106] represents the

reporting format used to communicate with Central Station

Telephone Number 2.

Table 10: Reporting Formats

UL Note: The installer is required to verify the complete

compatibility of the DAC Receiver and formats at least

once per year.

Standard Pulse Formats

The Magellan console can use the Ademco slow, Silent

Knight and SESCOA standard pulse reporting formats (see

Table 10 on page 29).

Ademco Contact ID

Ademco Contact ID is a fast communicator format that uses

tone reporting instead of pulse reporting. This communicator

format also uses a pre-defined list of industry standard

messages and report codes that will suit most of your basic

installation needs.

• To manually program the report codes, use the 2-digit

hexadecimal values from the Contact ID Report Codes

List in the Magellan Programming Guide.

• Enter 00 to disable reporting or FF to use the default

report code from the Automatic Report Code List in the

Programming Guide.

Please refer to Appendix 1: Ademco Contact ID

Report Code List on page 36 for a complete list of the

format’s pre-defined industry standard messages and

report codes.

SIA FSK

SIA FSK is a fast communicator format that uses tone

reporting instead of pulse reporting. This communicator

format uses a pre-defined list of industry standard

messages and report codes that will suit most basic

installation needs.

Please refer to Appendix 1: Ademco Contact ID

Report Code List on page 36 for a complete list of the

format’s pre-defined industry standard messages and

report codes.

Event Call Direction

Section [100]: Options [1] to [3]; Arming/Disarming

Option [1] ON = Call CSTN 1

Option [2] ON = Call CSTN 2

Option [3] ON = Call Pager telephone number

Section [100]: Options [5] to [7]; Alarm/Alarm Restore

Option [5] ON = Call CSTN 1

Option [6] ON = Call CSTN 2

Option [7] ON = Call Pager telephone number

Section [101]: Options [1] to [3]; Tamper/Tamper Restore

Option [1] ON = Call CSTN 1

Option [2] ON = Call CSTN 2

Option [3] ON = Call Pager telephone number

Section [101]: Options [5] to [7]; Trouble/Trouble Restore

Option [5] ON = Call CSTN 1

Option [6] ON = Call CSTN 2

Option [7] ON = Call Pager telephone number

Section [102]: Options [1] to [3]; Special

Option [1] ON = Call CSTN 1

Option [2] ON = Call CSTN 2

Option [3] ON = Call Pager telephone number

The events are divided into five groups (see above) where each

event group can be programmed to dial up to three telephone

numbers (CSTN 1 & 2 and the Pager telephone number) with

one as a possible backup (CSTN 2. See CSTN 2 as Backup

Number on page 28).

• When a reportable event occurs in the system, the Magellan

console will begin dialing the numbers sequentially starting

from CSTN 1 (if enabled), skipping any disabled numbers

and stopping once all selected telephone numbers have

been called.

• If after eight attempts of trying to call the central monitoring

station have failed, the console will then dial the selected

backup telephone number (if enabled. See CSTN 2 as

Backup Number on page 28).

• If the Alternate Dial option (see page 30) is enabled, the

console will dial the programmed backup telephone number

(if enabled. See CSTN 2 as Backup Number on page 28)

after every failed attempt.

• If no backup telephone number is programmed or section

[099] option [1] is disabled (OFF. See page 30), the console

will never report to the backup telephone number.

3-digit Value Reporting Format

001 Ademco slow (1400Hz, 1900Hz, 10BPS)

002 Silent Knight Fast (1400Hz, 1900Hz, 10BPS)

003 SESCOA (2300Hz, 1800Hz, 20BPS)

004 Ademco Contact ID

005 SIA FSK

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Comentarios a estos manuales

Sin comentarios

Magellan Paradox Manual de instalación Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Magellan Paradox