Magellan MG5000 Manual de instalación Pagina 21
- Pagina / 56
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MG5000 17
5.1.17 24 Hr. Hold-up Zones
Sections [001] to [032]: Zones 1 to 32, First Digits = 17
When a 24Hr. Hold-up zone opens, whether it is armed or disarmed, the console will immediately generate an alarm.
This alarm is defined by the alarm type, configured in Zone Programming under zone options [4] and [5]. See Alarm
Types on page 18. The SIA FSK and CID reporting formats include specific report codes to identify the alarm as a
Hold-up alarm.
5.1.18 24 Hr. Gas Zones
Sections [001] to [032]: Zones 1 to 32, First Digits = 18
When a 24Hr. Gas zone opens, whether it is armed or disarmed, the console will immediately generate an alarm. This
alarm is defined by the alarm type, configured in Zone Programming under zone options [4] and [5]. See Alarm Types
on page 18. The SIA FSK and CID reporting formats include specific report codes to identify the alarm as a Gas alarm.
5.1.19 24 Hr. Heat Zones
Sections [001] to [032]: Zones 1 to 32, First Digits = 19
When a 24Hr. Heat zone opens, whether it is armed or disarmed, the console will immediately generate an alarm. This
alarm is defined by the alarm type, configured in Zone Programming under zone options [4] and [5]. See Alarm Types
on page 18. The SIA FSK and CID reporting formats include specific report codes to identify the alarm as a Heat
alarm.
5.1.20 24 Hr. Water Zones
Sections [001] to [032]: Zones 1 to 32, First Digits = 20
When a 24Hr. Water zone opens, whether it is armed or disarmed, the console will immediately generate an alarm.
This alarm is defined by the alarm type, configured in Zone Programming under zone options [4] and [5]. See Alarm
Types on page 18. The SIA FSK and CID reporting formats include specific report codes to identify the alarm as a
Water alarm.
5.1.21 24 Hr. Freeze Zones
Sections [001] to [032]: Zones 1 to 32, First Digits = 21
When a 24Hr. Freeze zone opens, whether it is armed or disarmed, the console will immediately generate an alarm.
This alarm is defined by the alarm type, configured in Zone Programming under zone options [4] and [5]. See Alarm
Types on page 18. The SIA FSK and CID reporting formats include specific report codes to identify the alarm as a
Freeze alarm.
5.2 Zone Definition Status
There are eight zone definitions that are affected by the Stay/Sleep alarm delay (section [720]). The following table shows how
the zone definition changes depending on the arm status and if the Stay/Sleep alarm delay is enabled. see Stay/Sleep Arm Alarm
Delay on page 32.
Table 4: Zone Definition Status
Stay/Sleep Alarm Delay Disabled -
Section [720] is 0
Stay/Sleep Alarm Delay Enabled -
Section [720] is not 0
Zone
Definition
Description Stay Arm Sleep Arm Fully Arm Stay Arm Sleep Arm Fully Arm
03 Entry Delay1/Stay/Sleep Not Armed Not Armed Entry Delay 1 Not Armed Not Armed Entry Delay 1
04 Entry Delay2/Stay/Sleep Not Armed Not Armed Entry Delay 2 Not Armed Not Armed Entry Delay 2
05 Follow (Entry Delay/Instant) As is As is As is Follow (Entry
Delay/
SleepDelay)
Follow (Entry
Delay/SleepDelay)
Follow (Entry
Delay/Instant)
06 Follow/Stay Not Armed Follow (Entry
Delay/Instant)
Follow (Entry
Delay/Instant)
Not Armed Follow (Entry
Delay/SleepDelay)
Follow (Entry
Delay/Instant)
07 Follow/Stay/Sleep Not Armed Not Armed Follow (Entry
Delay/Instant)
Not Armed Not Armed Follow (Entry
Delay/Instant)
08 Instant As is As is As is Sleep Delay Sleep Delay Instant
09 Instant/Stay Not Armed Instant Instant Not Armed Sleep Delay Instant
10 Instant/Stay/Sleep Not Armed Not Armed Instant Not Armed Not Armed Instant
- MG5000 V1.4 1
- Table of Contents 3
- Part 1: Introduction 5
- Part 2: Installation 6
- MG5000 3 7
- MG5000 5 9
- 2.5 Auxiliary Power Terminals 9
- 2.6 Telephone Line Connection 9
- 2.7 Bell Output Connection 9
- 2.9 Single Zone Inputs 10
- MG5000 7 11
- 2.11 Fire Circuits 12
- Part 3: Programming Methods 13
- 3.2.3 Data Display Mode 14
- Part 4: Access Codes 15
- 4.5 User Code Options 16
- 4.6 Lock Master Code 17
- MG5000 13 17
- Part 5: Zone Programming 18
- MG5000 15 19
- MG5000 17 21
- 5.2 Zone Definition Status 21
- 5.3 Zone Partition Assignment 22
- 5.4 Zone Options 22
- MG5000 19 23
- 5.5 EOL Zones 23
- 5.6 ATZ Zone Doubling 23
- 5.7 ATZ Wiring Options 23
- Part 6: Wireless Features 24
- MG5000 21 25
- 6.3 Supervision Options 25
- 6.4 RF Jamming Supervision 25
- MG5000 23 27
- 6.9 Wireless Keypad Options 27
- MG5000 25 29
- 7.9 Timed Auto-Arming 32
- 7.10 No Movement Auto-Arming 32
- 7.14.1 Beep On Exit Delay 33
- 7.19 Exit Delay Termination 34
- 7.20 Fast Exit 34
- Part 8: Alarm Options 35
- MG5000 35 39
- 9.10 Personal Dialing Numbers 39
- 9.11 Reporting Formats 39
- 9.12 Dialing Method 40
- 9.25.1 TLM Fail Timer 42
- MG5000 39 43
- Part 10: Programmable Outputs 44
- MG5000 41 45
- 10.5 PGM Programming 45
- Part 11: System Settings 46
- 12.1.2 Number of Rings 48
- MG5000 45 49
- 12.6 Answer WinLoad Software 49
- 12.8 Call Back WinLoad 49
- Part 13: User Operation 50
- Magellan Series 47 51
- Magellan Series 49 53
- MG5000 51 55
- MG5000-EI03 56
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Magellan MG5000
(2 paginas)
(68 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales